L&S Pandora PB-3

The CORD Pandora PB-3 combines a rugged enclosed-emitter design with a large viewing window, multiple reticle options, and the popular ACRO P2 mounting footprint.

The PB-3 features a durable 7075-T6 aluminum housing, sealed lens construction, and an IPX8 waterproof rating for dependable performance in demanding environments. Its oversized 22 × 17 mm window provides a wide, unobstructed field of view while maintaining a compact footprint suitable for both pistol and rifle applications.

Features

• Enclosed-emitter micro red dot
• 7075-T6 aluminum housing
• 3 MOA dot / 32 MOA circle-dot reticle system
• Multiple selectable reticle configurations
• 22 × 17 mm viewing window
• Approximately 30% larger window than many comparable enclosed optics
• ACRO P2 footprint
• Side-loading CR2032 battery
• Up to 30,000+ hours of battery life, depending on brightness setting
• 7 daylight brightness settings
• 3 night vision settings
• Recessed brightness controls
• Ambidextrous top-mounted controls
• AuraWake™ technology
• IPX8 waterproof rating — tested to 10 meters for 90 minutes
• Reinforced lens sealing plates
• Protective objective-lens standoff for one-handed slide manipulation
• Beveled battery compartment designed to reduce interference during re-holstering
• Lifetime warranty from the manufacturer

AuraWake™ Technology

The PB-3 uses CORD’s AuraWake™ system to balance readiness and battery life. After approximately five minutes without movement, the outer 32 MOA ring enters sleep mode while the center 3 MOA dot remains continuously active.

When movement is detected, the outer ring reactivates, providing the benefits of motion-based power management while maintaining a constantly available aiming point.

Specifications

Reticle: 3 MOA Dot / 32 MOA Ring
Window Size: 22 × 17 mm
Overall Dimensions: 52 × 35 × 31.5 mm
Housing: 7075-T6 Aluminum
Battery: CR2032
Battery Life: 30,000+ Hours
Brightness Settings: 7 Daylight / 3 Night Vision
Mounting Footprint: ACRO P2
Water Resistance: IPX8 — 10 m / 90 minutes
Finish: Type III Hard-Coat Anodized

Mounting Options

The Pandora PB-3 uses the ACRO P2 footprint for direct compatibility with appropriately cut mounts and slides.

Optional Ghost Adapter Plates are available for MOS and RMR-pattern mounting applications. When using the RMR Ghost Adapter Plate, the optic is designed to sit exceptionally low and closely replicate the height of a direct-milled installation.

Finish Notice

Type III hard-coat anodizing is selected for its durability, abrasion resistance, and chemical resistance. Because of the anodizing process, slight variations in shade or finish may occur between individual components and optics. These variations are normal and do not affect performance.

Do not disassemble or remove the optic’s sealing plates. The optical assembly is nitrogen-filled and sealed for fog resistance, and unauthorized disassembly may affect the manufacturer’s warranty.